Analysis and solution of vibration damping and yellowing of vibration grinder

Update:01 Jul 2022

Vibration grinder is a kind of common grinding equipment in the market. It will vibrate during operation. However, in some daily processing, the deep processing of products requiring high precision is often suspended, and excessive vibration will lead to processing failure. Therefore, when the vibration grinder is used for precision mold grinding, the vibration of the grinder of the vibration grinder may be a headache.
As the vibration of the machine tool directly affects the role of mold processing, such as corrugation and surface finish, if it is precision molding and grinding, making plug-in connector molds, cutting grooves, etc., the vibration base of the machine cannot repair the grinding wheel. Sometimes the grinding wheel is required to be trimmed to a thickness of 0.1-0.13mm, and the grinding wheel is as transparent as possible. If the grinding machine has a slight vibration and other unstable factors, the grinding wheel will explode.
If the vibration grinder turns yellow in production, please check whether the surface finish of the abrasive used in the vibration grinder is normal. If the grinding material you use is steel balls, please check whether there is perforation. If there is, please use alkaline brightener to grind for about 1H, and clean the machine fully. Do not use hard water for a short time, otherwise it will be the opposite.

If the vibration polishing time of the vibration grinder is not good, or the machine table is not clean, the same problem will also be caused; Whether there is any quality problem with the applied brightener, brightener or polishing liquid. Generally, if you can use neutral or alkaline brightener, try to use neutral or alkaline brightener. The stability of the liquid medicine performance is better than that of the acidic one. Welcome to Baozhen for consultation on various grinding problems. We are professional in grinding.
If your product is polished by craft first, please confirm whether the oxide skin on the product surface is polished thoroughly, resulting in inconsistent gloss or insufficient gloss after vibration polishing. The normal stability of the vibration grinder can be guaranteed only after detailed inspection in many aspects.


Mass Finishing Machines and Tumbling Media