The dry high-speed grinding and polishing machine does not have fine metal dust during the grinding and polishing process, and it can be applied to all kinds of special-shaped products. Compared with the traditional grinding and polishing machine, it has many advantages, so what should the dry high-speed grinding and polishing machine be? What about the operation?
Rough grinding: (Rough grinding means to smooth the surface)
1. After installing the product, hang the hanger into the barrel of the machine;
2. put in coarse grinding abrasive and coarse grinding oil;
3. Timing, adjust the frequency;
4. boot, start
Refining: (The so-called refining is slipping away)
1. Take out the coarsely ground products and hangers and put them in the prepared fine grinding bucket;
2. the same oil is used for fine grinding abrasives and fine grinding oil;
3. Timing, adjust the frequency;
4. boot, start;
After grinding, take out the product, pack, ship, or proceed to the next step-electroplating.
The advantages of dry glazing machine are:
1. Reduce labor and save costs;
2. avoid environmental problems;
3. low noise (below 50 decibels);
4. Can solve the problem of output.
