How to use the grinding and polishing machine

Update:04 Nov 2020
Some friends may not know very well about grinding and polishing machines, because they are not commonly used in daily life.    Some friends may not know the polishing machine very well, because it is not commonly used in daily life, so if we need to use it, we don't know how to operate it. So how does the polishing machine operate? What is the method. Today, the editor brings you the steps of using the polishing machine.
 
How to use grinding and polishing machine
 
1.(Prelude to homework): 
1. First, clean up the sanitation around the work site for 5S, tidy up the idle things, clean up the things that are not related to the work, and discharge the ready-to-use workpieces to the proper place.   
2. Check the whole polishing machine, check whether there is any abnormality in the operation of the polishing machine when the power is turned on, and debug the looseness of the fixing bolts 
3. The polishing machine operating tools have complete conditions.  
 
 
2. (Normal operation):   
 
1. During the operation of the polishing machine, it must be operated in accordance with the requirements of the polishing machine.   
2. The operator shall not wear gloves during the normal operation of the polishing machine. This is an express regulation in the industry.   
3. The operator must self-check the effect of the processed items at any time to check whether there are any abnormalities in the processed workpiece, such as deformation, fronting, and imprints. It is more necessary to maintain communication with relevant staff at any time to prevent serious errors.   
4. The grinding and polishing machine is working normally and abnormally. As an operator, you can feel or hear the abnormal sound of the machine. Of course, you must stop working immediately and eliminate the malfunction before normal operation.   
5. Professional professional operation is beneficial to both people and polishing machine.
  
3. (Aftermath work):   
1. After stopping work, keep the area around the polishing machine clean and clean up the production waste in time.   
2. Place the operating tool to the set position, arrange and arrange the processed product workpieces, and place them in the appropriate position.   
3. Turn off the power, and unplug the device
 
 
How to use grinding and polishing machine  
 
1, turn on the "emergency stop" button;   
2. Adjust the slot of the sink to properly lock the sink, record the data of each slot, and take a photo of the caliper position (Note: align the sink hole with the center of the turntable);   
3. Number the program name and "reset" to the original position;   
4. Adjust the depth of the grinding wheel, pay attention to adjusting the lower limit position of the sensor and the position of the screw;   
5. "Clear data" for the existing data, press "Debug Stop", the "Debug Start" light is on, and debugging starts, the steps are as follows:   
① "In front of the grinding wheel", move the grinding wheel forward to an appropriate position;   
② "Workpiece positive" rotates the workpiece by a certain angle;   
③ "Behind the grinding wheel", move the grinding wheel back to an appropriate position so that the grinding wheel is in close contact with the arc of the sink.   
6. ​​After finishing debugging the polishing machine, "monitor" the data to check whether there is any abnormal data. If so, correct it;   
7. After the correction is completed, press "Start debugging", the debugging start light is off, and the debugging ends; "Set to "Auto", then "Reset", turn on "Auto start", and try to throw the water tank;   
8. Check the polishing effect, make corrections, and complete debugging.
 

 

 
 
           

Mass Finishing Machines and Tumbling Media