Because there are many kinds of grinding stones, there are thousands of kinds according to material, shape, and size. From these thousands of kinds of grinding stones, you must choose the grinding stone suitable for your product process. The choice of grinding stone directly affects the quality, etc. problem. The choice of grinding stone respects the following aspects.
1. The size of the abrasive material should not exceed the size of the part
Generally speaking, the size of the abrasive material should not exceed the size of the part to avoid crushing or bruising the part by the abrasive material.
2. Do not block the inner hole or inner diameter on the part
Some parts have holes or inner diameters on the surface. When choosing a grinding material, you should pay special attention to this situation to avoid a large number of parts' inner holes or inner diameters being blocked by the grinding material during grinding. For this kind of parts, we choose grinding The size of the material should be larger or smaller than the inner hole (inner diameter).
3. Easy to filter
The size of the abrasive material is smaller than the size of the part. After the grinding process is completed, we can use a screen or screening equipment to quickly separate the abrasive material from the part; if the sizes of the two are the same, then when screening , It will be very time-consuming and laborious.